One Word: Biocide In Oil And Gas

Which are the ways of sterilizing biocides?
As all of us know, biocides is a broadly used sewage treatment agent, which has a large demand in the market, and can also be known by customers with its secure functionality and no contamination. However, you understand What are the ways of sterilizing biocides?
1.
We can open the medicinal hot water before placing in the biocides. Focus on the water temperature, generally approximately 60 degrees, not more than 70 degrees, otherwise it will affect the activity of the biocides, then filter may be used, when it is delivered, it may be added at one time, or it can be added once a change, and it can be placed at a predetermined point;
2.
Use the medicated funnel to place it: This method is relatively simple and relatively straightforward. We could put the Proper amount of bactericidal algicide to the funnel and right put the medicine into the boiler at a certain speed; If there's a water tank with algaecide in the boiler, then there is no economizer. This way, we could immediately place the medicine to the water tank, and the medication can be directly delivered to the furnace with the water distribution system to achieve the results of sterilization and algae removal; 4. Standard shipping, the sewage release speed of this method is approximately 7%, but to make sure that there's one release per change, the time is controlled at roughly 50s. Be aware that if there's absolutely no water level change following the sewage treatment, it is necessary to check if the furnace is obstructed. .
Evaluation of the main functional consequences of biocides The ecological environment where we live has also undergone earth-shaking alterations. The soil has been destroyed and the water quality has become complicated. In the creation of sector and biology, a high number of chemical agents are used, which makes the various chemical components in the water surplus, creating a fantastic environment for the development of fungi and algae in the water, which affects its further improvement. Therefore, how can we fix these algae and fungi?
At this time, it is our turn to use our biocides. The biocides is a non-oxidizing bactericide. The appearance is colorless or pale yellow liquid liquid. Why can it be bactericidal and algae-killing? That is because the biocides itself comprises active chlorine, monoatomic oxy-hydroxyl bands and IRO biocide a few polymers, which may effectively curb the formation of the expanding environment and take out the nutrients needed for algae and fungi growth. Ingredients to attain the effect of sterilization and algae elimination.
From the production process, other sterilizing agents are occasionally utilized in combination with additional water treatment agents to restrain the normal operation of the circulating water system from the water treatment system. Because the bactericidal treatment agent is a chemical, we ought to take protective steps when using it. After use, it ought to be sealed in a plastic bucket and set in a cool, dry and ventilated place indoors.
Our company is a manufacturer of bactericidal treatment representatives, with research group, fantastic product quality and high credibility. If you want a deep comprehension of our products, it is possible to consult the official website.